-21%
, , ,

Integra DRX 2.4 7.2-Channel Network A/V Receiver


Sales tax for CA residents only

$749.00 $950.00

Integra DRX 2.4 7.2-Channel Network AV Receiver, MSRP: $950.00
Prepare for the 8K Theater Revolution
High-spec HDMI® unlocks exciting features for gamers and film lovers in your family, including 8K video passthrough, HDR10+, and low-latency gameplay. Enjoy DTS:X® and Dolby Atmos® 3D soundtracks with refined Integra power and convenient voice-controllable multi-room audio.

 

Key Features

  • 5.1.2-ch Dolby Atmos® and DTS: X® playback
  • Dolby Atmos Height Virtualization
  • Dolby Surround® and DTS® Neural:X upmixing
  • HDMI 2.1 features are supported on HDMI inputs 1–3, Main Out, and Sub/Zone 2 Out in Sub Mode output including VRR, ALLM, QFT (Quick Frame Transport), DSC (Display Stream Compression), QMS (Quick Media Switching), and eARC (Main Out).
  • Inputs 1-3 support HDMI 2.1 8K/60AB and 4K/120AB. Inputs 4-6 support up HDMI 2.0b 4K/60. Main+Sub output supports simultaneous 8K/60AB and 4K/120AB, and Main+Zone 2 supports 8K/60AB and 4K/60 respectively.
  • HDMI Main Out with eARC for encoded HQ audio, Sub/Zone 2 Out with OSD
  • Bidirectional Bluetooth® wireless technology Version 4.2 + LE (A2DP v1.2, AVRCP v1.3; RX: SBC/AAC, TX: SBC/Qualcomm® aptX™/apt X HD)
  • Dedicated DACs support synced/independent D/A audio distribution in Zone 2 and Zone 3 (including HDMI/SPDIF/NET*6) via Zone 2 and Zone 3 speaker outputs, Zone 2 pre-out, and Zone 3 pre-out
  • Share any MAIN audio source to a wireless headphone dock via Zone B line-out
  • Phono equalizer (MM) and SACD (Super Audio CD) playback via HDMI (2.8 MHz 2-ch/multichannel)
  • AccuReflex™ phase-matching solution for Dolby Atmos-enabled speakers
  • Original DSP-based Vocal Enhancer clarifies in-program vocals/dialog

Specifications:

Amplifier Section
Power Output
Front L/R: 170 W/Ch at 6 Ohms, 1 kHz, 10%, 1 Channel Driven,
80 W/Ch at 8 Ohms, 20 Hz–20 kHz, 0.08%, 2 Channels Driven, FTC
Dynamic Power: 160 W (3 Ohms, Front), 125 W (4 Ohms, Front), 85 W (8 Ohms, Front)
Input Sensitivity and Impedance: 200 mV rms/47 k-Ohms (Line/Unbalance)
3.5 mV rms/47 k-Ohms (Phono MM)
THD+N (Total Harmonic Distortion + Noise) : 0.08% (20 Hz–20 kHz, Half Power)
Rated RCA Output Level and Impedance: 1 V rms/470 Ohms (Pre-out/Subwoofer Pre-out)
200 mV rms/470 k-Ohms (Zone B Line-out)
Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
Frequency Response: 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone Control: ±10 dB, 20 Hz (Bass), ±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio: 106 dB (IHF-A, Line), 80 dB (IHF-A, Phono)
Speaker Impedance: 4 Ohms–16 Ohms
Tuner Section
Tuning Frequency Range: FM 87.5 MHz–107.9 MHz, AM 530 kHz–1,710 kHz
FM/AM Preset Memory: 40 Stations
General
Power Supply: AC 120 V~, 60 Hz
Power Consumption: 460 W
Standby Power Consumption: 0.1 W
Dimensions (W x H x D): 17 1/8˝ x 6 7/8˝ x 14 13/16˝, (435 x 174 x 376.5 mm)
UPC: 889951003366

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Integra DRX 2.4 7.2-Channel Network A/V Receiver”

There are no reviews yet.