-18%
, , ,

Klipsch RW-5802 IW Sub II In-Wall Subwoofer


$599.00 $729.00

Klipsch RW-5802 IW Sub II In-Wall Subwoofer, MSRP: $729.00/each

Capturing all the sonic excitement of low-frequency effects without taking up valuable floor space, the RW-5802-II in-wall subwoofer is certainly a force to be reckoned with. When combined with the RSA-500 dedicated subwoofer amplifier* this hard-hitter perfectly anchors an architectural home theater or two-channel system.

Features:

  • Dual active 8″ Cerametallic woofers
  • Sealed integrated enclosure for maximum installation flexibility
  • Flat, magnetic paintable steel grille fits any decor
  • High power handling

Fitting standard 2” by 4” construction, the easy-to-install RW-5802 II can accommodate any new or existing structure with a minimum 0.5” dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure, this high-powered, passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.

The RW-5802 II gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff, welldamped Cerametallic cones, a specially treated aluminum that has been anodized, or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength, this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.

Designed to power the RW-5802 II, the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.

Specifications:

Frequency Response: 45 Hz – 140 Hz +/– 4dB
Sensitivity: 90dB @ 1 watt / 1 meter
Nominal Impedance: 8 ohms
Low Frequency Driver: Dual 8” (20.3cm) front firing, Cerametallic cone, cast aluminum frame drivers
Enclosure Material: Sealed: MDF baffle, ABS shell
Enclosure Type: Sealed Enclosure
Amplifier: Use only with RSA-500
Amplifier Power: See RSA-500 specifications
Hole Dimension: 19” (48.3cm) H x 10” (25.4cm) W
Height: 20.8” (52.8cm)
Width: 11.8” (29.9cm)
Depth: 3.7” (9.4cm)
Finish: White
Built from: 2015
UPC: 743878029581

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Klipsch RW-5802 IW Sub II In-Wall Subwoofer”

There are no reviews yet.